Skip to main content

168 docs tagged with "WGCV"

View all tags

Accuracy

Closeness of agreement between a measured quantity value and a true quantity value of a measurand.

Algorithm Theoretical Basis Document

Document detailing the theoretical foundation of an algorithm, including physical theory, mathematical procedures, and assumptions, updated with algorithm changes.

Analysis

Verification method using analytical techniques to demonstrate theoretical compliance with requirements through review, modeling, simulation, calculations, or data comparisons.

Analysis Ready Data

Processed data product geometrically referenced and minimally corrected to enable direct use without additional user processing.

Ancillary Data

Data acquired on the same platform as the main sensor but not from the sensor itself, used primarily for processing instrument data.

Area of Representativeness

Area (or volume) where concentration does not deviate from the station value by more than a specified range.

Artifact

- A physical object that is made or modified by human culture - a three-dimensional object held in an archives - a library or archival resource that has value as a physical object in addition to it...

Attitude Data

Data representing spacecraft orientation, pointing, calibration, alignment, Euler angles, quaternions, rates, biases, and associated accuracy parameters.

Auxiliary Data

Data enhancing processing and utilization of main sensor data, collected via different processes or platforms, and usable as independent datasets.

Band Central Wavelength

Single wavelength Value within the sensitivity interval of a spectroradiometric Sensor which represents the respective band.

Baseline

Reference Period, time or measure against which the Information is assessed or compared.

Bias

- measurement bias: estimate of a systematic measurement error - instrument bias: average of replicate indications minus a reference quantity value - estimate of a systematic forecast error.

Bias correction

Reconciling differences between sensors and/or products by a simple multiplication or addition of a correction factor.

Calibration

Process of quantitatively defining a system's response to known, controlled inputs using reference measurements.

Calibration Data

Data required to calibrate instrument science data, engineering data, and spacecraft data, including pre-flight and in-flight measurements, calibration coefficients, and ground truth.

Collection

Group of products that have been processed using a consistent radiometric calibration, geometric registration base, data/metadata format, and version of processing algorithms.

Collection Update

Minor revisions to a relatively small number of products within a collection for the purpose of correcting errors and maintaining consistent quality.

Collection Upgrade

New and improved major version of all products within a collection due to comprehensive reprocessing.

Confidence Interval

Probability that the Quantity lies in the interval, conditioned on the measuring or modelling assumptions.

Covariance Matrix

Symmetric positive semi-definite matrix of dimension N × N associated with an estimate of a real vector quantity of dimension N × 1, containing on its diagonal the squares of the standard uncertain...

Data

Value and possibly Uncertainty of a Trait of a specific Entity.

Data fusion

Framework for combining data from multiple sources to produce higher-quality information, with quality defined by application context.

Data Integration

Process of making datasets from different sources compatible through consistent naming, units, and coordinates to enable combined use.

Data Maturity

Beta Products intended to enable users to gain familiarity with the parameters and the data formats. Provisional Product was defined to facilitate data exploration and process studies that do not r...

Data Quality

Metric—such as a number, graph, uncertainty budget, or flag—that enables users to evaluate the fitness for purpose of data or derived products.

Data Time series

A data sequence that is designed to be consistent over a defined time interval.

Dead Band

maximum interval through which a value of a quantity being measured can be changed in both directions without producing a detectable change in the corresponding indication.

Derivative Product

Product additionally processed from baseline or unenhanced mission data.

Derived Products

Higher-level products (level 1b through 4) generated by applying calibration, geo-location transformations, and algorithms to produce sensor units or gridded geophysical parameters.

Detection limit

measured quantity value, obtained by a given measurement procedure, for which the probability of falsely claiming the absence of a component is β, given a probability α of falsely claiming its pres...

Duration

Non-negative interval Quantity of time equal to the difference between the final and initial instants of a time interval.

Dwell Time

Time that an antenna beam spends on a target.

Earth Observation

Science domain dealing with technologies and methods of collecting and analyzing observations about the different Earth spheres.

Earth Observation Product

Direct output from standardized satellite data processing chains (indicative levels 2 and 3), representing fundamental geophysical and biophysical variables.

Earth System Data Record

A unified and coherent set of observations of a given parameter of the Earth system, which is optimized to meet specific requirements in addressing science questions.

Engineering Data

Data which describe the physical condition and operation of the platform and instruments on the platform.

Entity

Something that has separate and distinct existence and objective or conceptual reality.

Error

Measured quantity value minus a reference quantity value.

Feature

Abstraction of real-world phenomena.

Fiducial

used as a fixed standard of reference for comparison or measurement (fiducial point).

Fiducial mark

index mark on a test system that allows automatic geometric identification and orientation detection of an object using imaging systems.

Field-of-regard

an area of the object space scanned by the field-of-view of a scanning sensor.

Field-of-view

the solid angle from which the detector receives radiation.

Footprint

the area of a target encircled by the field-of-view of a detector of radiation, or irradiated by an active system.

Fundamental Climate Data Record

Long-term, stabilised record of calibrated sensor observations in physical units with quantified uncertainty and associated ancillary data.

Fused Product

Derived data product created by merging two or more fully interoperable products into a single, non-reversible dataset.

Geodesy

The branch of applied mathematics that deals with the measurement of the shape and area of large tracts of country, the exact position of geographical points, and the curvature, shape, and dimensio...

Geolocating

Geopositioning of an Object using a Physical Sensor Model or a True Replacement Model.

Geopositioning

Determination of the geographic Position of a point (0D) or linear (1D) Feature.

Georectifying

Correcting for positional displacement with respect to the surface of the Earth.

Ground Truth

Geophysical parameter data, measured or collected by other means than by the instrument itself, used as correlative or calibration/validation data for that instrument data.

Homogeneous Data

Data drawn from a single population with constant external influences throughout the observation period.

Homogenisation

Unlike harmonisation, homogenisation is where all satellites are forced to look the same such that when looking at the same location at the same time they would (in theory) give the same signal.

In Situ Measurement

(1) a direct measurement of the measurand in its original place (2) any sub-orbital measurement of the measurand.

In-Situ Observation

Observations performed in the same Place where a Phenomenon occurs, normally without isolating it from other systems (its environment) or altering its pre-Observation state.

Indication

Quantity value provided by a measuring instrument or a measuring system.

Influence quantity

Quantity that affects the relation between the indication and the measurement result without affecting the measured quantity.

Information

Result of organizing, interpreting, categorizing, or classifying data to assign meaning understandable by the addressee.

Instrument

Hardware system that collects scientific or operational data, or a hardware-integrated collection of one or more sensors contributing data of one type to an investigation.

Instrument Calibration

Determination of parameters describing instrument characteristics for generating calibrated and comparable physical values, varying by instrument, mode, and over time due to degradation.

Instrument Data

Data specifically associated with the instrument, either because it was generated by the instrument or included in data packets identified with that instrument.

Instrumental drift

Continuous or incremental change over time in indication, due to changes in metrological properties of a measuring instrument.

Interferometric Baseline

Accurate determination of orbital distances between satellites with compatible orbits, required for SAR and differential interferometry applications.

Interoperable Products

Set of two or more ARD products sufficiently documented to enable processing across a continuum of geometric and/or radiometric standards for direct quantitative comparison.

Laboratory Observation

Usually in-situ observations in which the Object or Phenomenon is isolated from other systems or altered in its original conditions or environment.

Location Error

Measure of the agreement between the represented Location of an Object and the true Location.

Measurand

Particular Quantity subject to Measurement.

Measurement Procedure

Detailed description of a measurement based on one or more principles and methods, including the measurement model and all calculations to obtain a result.

Methodology

A generalised description of an approach or set of approaches to carry out a particular task.

Model

An, often numeric, theoretical (or otherwise abstract) representation of an Entity intended to generate Data describing one or more of its traits (as a result of pre-set conditions).

Monitoring

(1) systematic evaluation over time of some quantity (2) by extension, evaluation over time of the performance of a system, of the occurrence of an event etc.

Object

Entity with a well-defined boundary and identity that encapsulates state and behaviour.

Observation

Act of determining the Value of a Property by interacting in a reproducible way with the Phenomenon using a Sensor.

Orbit

Path in space described by a satellite revolving around the Earth under mutual gravitational attraction.

Orbit Prediction and Determination

Generation of attitude and state vectors to describe spacecraft position over time, computed either in advance (predicted) or after observation (restituted or precise).

Parameter

A measurable or derived variable occurring in the physical or digital world.

Phenomenon

Entity with at least one Property referenced by an identifier.

Platform

Support carrying instrument(s) or sensor(s), such as a spacecraft, aircraft, or ground-based platform.

Positional Accuracy

Closeness of coordinate value to the true or accepted value in a specified reference system.

Precise Orbit

Orbit model derived from all available satellite tracking data and dynamical corrections, achieving highest accuracy.

Precision

Closeness of agreement between indications or measured values obtained by replicate measurements on the same or similar objects under specified conditions.

Primary Data

A set of results from a scientific observation, i.e.

Procedure

Specified way to carry out an activity or a process.

Process

Series of activities that interact to produce a result.

Process Validation

Established documented evidence providing high assurance that a process consistently produces products meeting predefined specifications and quality characteristics.

Processing

Generation of higher-level products from lower-level and auxiliary products using version-controlled core algorithms supplemented by administrative functions.

Processing Baseline

A combination of processor versions, auxiliary data and other needed enablers that allows the generation of a coherent set of EO products.

Processing Levels

Raw Data The physical telemetry payload data as received from the satellite, i.e.

Product

Electronic data package distributable to users; content is derived from instrument data via processing involving ancillary and auxiliary data.

Product Quality Control

Determination of quality parameters for individual products through automated or manual activities such as quick look visualization.

Product Team

Scientifically knowledgeable team ensuring products are generated, high quality, well documented, and delivered to the archive.

Quality

Degree to which a set of inherent characteristics of an object fulfils requirements.

Quality Assessment

Derivation of quality indicators sufficient to assess fulfillment of quality requirements.

Quality Assurance

Part of quality management focused on providing confidence that quality requirements will be fulfilled.

Quality Control

Activities to check and optimize data accuracy and precision after collection; part of quality management focused on fulfilling quality requirements.

Quality Indicator

Indicator providing sufficient information to allow all users to readily evaluate the fitness for purpose of the data or derived product.

Quality Information

Secondary data required to assess the primary data set’s fitness for purpose, e.g.

Quantity

Property having a magnitude that can be expressed as a number from a continuous and contiguous range and a reference.

Quarantine

Withholding of an Earth observation product from distribution due to severe technical or quality issues.

Radiometric Calibration

Determination of radiometric instrument performance across spatial, spectral, and temporal domains by relating output to true radiometric values.

Random Error

Component of measurement error that varies unpredictably in replicate measurements.

Reference

Phenomenon whose values for specific properties are known and understood with an Uncertainty significantly lower (quantify?) than that of the Observation with which it is compared.

Remote Sensing

Type of Observation performed at a significant distance from a Phenomenon.

Repeatability

Measurement precision under conditions including the same procedure, location, equipment, and replicate measurements on similar objects over time.

Replicability

Property enabling other researchers to conduct an independent study with different data and similar but not identical methods, yet arriving at results that confirm the original study's hypothesis.

Representativeness

Quality or characteristic of a measurement or Observation to accurately represent a specific geographic location, time Period, or environmental condition.

Reprocessing

Systematic generation of a new product revision using archived lower-level products, typically triggered by an improved processing algorithm.

Reproducibility

Validity of study results through exact reproduction using the same data and methods to verify authenticity.

Resample

Technique of transforming a digital image to alter resolution, orientation, or sampling points for applications in medical, industrial, and remote sensing contexts.

Research Product

A data product produced at a science computing facility by a research algorithm for later migration to a community consensus algorithm and can be archived and distributed by an archive center.

Restituted Orbit

Orbit determination using delayed telemetry data with a one-day latency, computed from a three-day moving window and typically sampled every 60 seconds with lower precision than precise orbits.

Sample

Subset of one or more entities.

Science Data Segment Interface

System for assessing and verifying quality of Raw Data Records (RDRs), Sensor Data Records (SDRs), Environmental Data Records (EDRs), and Temperature Data Records (TDRs) through distributed Product...

Science Stewards

Experts providing scientific oversight to ensure accurate data and metadata representation, guiding data quality, characterization, and usability requirements.

Segregation

Earth observation products with degraded quality relative to nominal standards, such as those acquired during maneuvers or special campaigns, still useful but requiring clear indication of status a...

Sensitivity of a Measuring System

Quotient of the change in an indication of a measuring system and the corresponding change in a value of a quantity being measured. Note: sensitivity can depend on the value of the quantity being m...

Sensor

Device or instrument suited (through physical/chemical interaction) to measure one or more properties of a Phenomenon and thus collect factual/objective data.

Source Data

Data required for producing an Earth observation collection, including unenhanced satellite mission data, precision-corrected Level-1 radiance, or other pre-processed formats meeting program requir...

Spatial Completeness

Presence or absence of gaps, which are missing values in an otherwise continuous spatial data series.

Spatial Consistency

Condition where the spatial statistical properties of the data depend only on the underlying physical processes and not on other factors such as fusing different products or sensors.

Spectral Band

Part of the electromagnetic spectrum of specific wavelengths.

Stability

Maximum acceptable change in Uncertainty per decade.

Standard Uncertainty

Standard deviation of the probability distribution describing the spread of possible values in quantitative/continuous data.

Standardisation

Establish an agreement (not necessarily obligatory) on precise procedures and concepts.

Structured Error

Errors in satellite imagery affecting multiple pixels non-uniformly, where errors are correlated across affected regions due to localized systematic or random effects.

Swath

Area covered by spatial samples collected during a scan of a spaceborne instrument, determined by its incidence angle.

System

Set of interrelated or interacting elements.

Systematic Error

Component of measurement error that remains constant or varies predictably across replicate measurements.

Temporal Consistency

Condition where the temporal statistical properties of the Sample depend only on the underlying physical processes and not on other factors such as fusing different products or sensors.

Temporal Resolution

Regular interval between observations or model time steps that determines the smallest resolvable event or process.

Traceability

Property of a measurement result whereby the result can be related to a Reference through a documented unbroken chain of calibrations, each contributing to the measurement uncertainty.

Traceability Chain

Sequence of measurement standards and calibrations that is used to relate a measurement result to a reference.

Trait

Characteristic belonging to an entity and referenced by an identifier.

Type A evaluation of uncertainty

Method of evaluation of a component of measurement uncertainty by a statistical analysis of quantity values obtained by measurements under repeatability conditions.

Type B evaluation of uncertainty

Method of evaluation of a component of measurement uncertainty by means other than a statistical analysis of quantity values obtained by measurement.

Uncertainty

Parameter, associated with the result of a measurement, that characterises the dispersion of the values that could reasonably be attributed to the measurand.

Uncertainty of Measurement Method

Uncertainty associated with the method of measurement, as there can be other methods, some of them as yet unknown or in some way impractical, that would give systematically different results of app...

Validation

Process of assessing, by independent means, the quality of the data products derived from the system outputs.

Value

Element of a type domain.

Variable

Physical property whose value determines the characteristics or behavior of a system, such as temperature, pressure, or density.

Verification

Provision of objective evidence that a given item fulfils specified requirements.

Vicarious Calibration

Post-launch calibration of sensors that make use of natural or artificial sites on the surface of the Earth.